Fits: Meade 10 inch (25 cm) f/6.3 SCT versions (2120, LX10, LX50, LX100, LX200) which are marked f/6.3 WIDE-FIELD on the corrector ring (Meade 8” f/6.3 is shown in the link)
Since
the factory dust cover contacts the secondary housing when installed,
additional clearance is needed to make room for the knobs. We provide a
set of spacers that attach to the inside of the dust cover to move it
slightly away from the secondary assembly. You can also press the center
of the cover from the inside to contour it for additional clearance.
An Allen wrench for removing the factory collimation screws is included with your order.
