Canadian Telescopes
Your Basket is Empty
View Basket
Wish List
 
 
Shop By Brand
Shop By Type
Accessories
Adapters & Cables
Barlow Lenses
Cases & Covers
Dew Control
Diagonals
Drives & Controllers
Eyepieces
Filters
Finder Scopes
Flashlights
Focusers
Books & Charts
Mounts & Tripods
Mount Accessories
Telescope Tune-Up
Software & DVDs
Spectrometers
Spotting Scope Accessories
Solar Observing
Photometers
Astrophotography
Binoculars
About Us
Gears - Gen X 3 Heated Vest Liner

Gears - Gen X 3 Heated Vest Liner


GEN X-3 Heated vest is ergonomically designed to fit the body snuggly and gives extra warmth.
Submit Your Review
Item No: G100239-1

  

FREE SHIPPING

Tell a Friend





·      Constructed of windproof, waterproof polyester , the GEN X-3 Heated vest is ergonomically designed to fit the body snuggly and gives extra warmth

·      Heating elements are  MADE IN  USA

·        Snap on electric connection on back of vest for connecting your gloves by using snap ON-OFF glove harness( PART # 100226-1/OPTIONAL)

·       Vest has  two input connection  points( fixed on the inside left side panel) so the Vest  and Gloves heat can be controlled individually (If connected  with dual switch cord or dual thermostat)

·      Heats the entire Vest including the back and collar, works best when worn over a  T-shirt and under a Jacket

·      Easily accessible TWO SIDE POCKETS  on front to keep wallet or other essentials

·        Comes with a   battery cord( 20” long)

·       This vest works with 12 volts battery and provides 35 watts of heat and draws 2.9 amps of current for size 34 / 45 watts of heat drawing 3.7 amps of current for size 36 to 52/ 71 watts of heat drawing 5.9 amps of current for size 54 and 56

·       Available sizes: 34, 36, 38, 40, 42, 44, 46, 48, 50, 52, 54 ,56,58

 

Note : You will need to get any one of the different types of the ON /OFF switch or controller for controlling the heat setting  (100222-1/Coax switch cord ,100225-1/Dual coax switch cord ,100230-1/single temperature controller ,100231-1/Dual temperature controller) .The Dual switch cord or Dual temperature controller  helps you turn ON or OFF  the Vest/ Jacket Liner and the Gloves individually or they can be maintained  at two different temperatures using dual controller. Dual controller or Dual switch will be required only if you plan to use the Glove with your Vest/ Jacket Liner

 

IMPORTANT INFORMATION - The GEN X-3 line of heating clothing is not compatible with the GEN X 2 line of heated clothing. Any attempt to do so with ruin the heated clothing and VOID your warranty immediately!!!

 

 

SIZING:

The vest when worn  should be touching the  body profile  as much as possible leaving no room for extra  movement .Choosing the correct size of vest depends on the exact chest size For example,  42 size vest is a good fit  size for a person  with 42 inch  around the chest. The chest should be measured just under the arms.

Wear a T- shirt below while sizing your vest. If you need to wear a thicker garment, wear it over the vest for best results.

Submit Your Review